Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Centre Console of an Audi Q2?

Model: Audi Q2 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

Video tutorial

To dismantle the centre console of the Audi Q2, use a lever tool to lift the various plastic parts that are clipped in place. Start with the section under the cigarette lighter, then insert the lever into the side of the console on the passenger side.

By releasing this clip, you can lift the entire console. Before removing it, disconnect the clips securing the gear gaiter.

At this point, simply detach all connectors and remove the console cover. Now the part can be replaced.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Remove the Centre Tunnel of an Audi Q2
How to Remove the Centre Tunnel of an Audi Q2
Audi Q2 (2016-2024 / MK 1) Removing the centre tunnel of an Audi Q2 is not difficult if you know how to do it, but some guidance on how to proceed is certainly useful if you ha…
Resetting the Service Light on an Audi Q2
Resetting the Service Light on an Audi Q2
Audi Q2 (2016-2024 / MK 1) After changing the engine oil on an Audi Q2, you need to reset the system that alerts you to the need for this important maintenance operation. Sit i…
How to Reset the Tyre Pressure Light on the Audi Q2?
How to Reset the Tyre Pressure Light on the Audi Q2?
Audi Q2 (2016-2024 / MK 1) To reset the tyre pressure light on the Audi Q2, inflate the tyres to the corresponding pressure value: these values will be indicated on the sticker…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos