Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill Windshield Washer Fluid on Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016

In this video tutorial, learn how to refill the windshield washer fluid on the Audi A4 B8, in Avant version, as well as on most models from the manufacturer, by following these simple and quick instructions. First, open the hood by pulling the lever located on the driver's side; then, remove the fluid filler cap located at the top right, as shown in the video. At this point, fill the reservoir with new fluid until the maximum level is reached (indicated by fluid overflow).

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Washer Pump and Hoses on the Audi A4
How to Replace the Windshield Washer Pump and Hoses on the Audi A4
Audi A4 (2007-2016 / B8) This guide outlines the main instructions on how to remove and replace the windshield washer pump and its hoses on the Audi A4. First, lift the vehic…
How to Refill the Windshield Washer Fluid in an Audi A4?
How to Refill the Windshield Washer Fluid in an Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial, you will see how to refill the windshield washer fluid in an Audi A4, a very simple and quick operation. As shown, the fluid reserv…
How to top up the windshield washer fluid in the Audi A4
How to top up the windshield washer fluid in the Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to top up the windshield washer fluid of the 2018 Audi A4. The windshield washer fluid tank, unlike other vehicles, is not …

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos