Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument cluster on the Audi A3 MK1

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Instrument cluster

Let's find out in this guide the procedure we will need to disassemble the instrument panel on the Audi A3 first series, following these simple steps. First we get on board the car and move the steering wheel towards ourselves, in order to make room for it; then we go to remove the plastic that we find under the panel, in order to unscrew the two fixing screws of the instrument panel, using a Phillips screwdriver, as shown in the video. At this point we can definitively extract the panel by disconnecting the electrical connector on the back!

Posted on 5 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from an Audi A3
How to Remove the Instrument Cluster from an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to remove the instrument cluster from an Audi A3? Follow these steps carefully: Unscrew the securing screws located at the bottom of the instrume…
How do you remove the instrument cluster from the Audi A3?
How do you remove the instrument cluster from the Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) In order to remove the instrument panel of the Audi A3, it is necessary to remove the plastic cover located in the lower central part of the instrume…
How to perform a factory reset of the Audi A3 8Y
How to perform a factory reset of the Audi A3 8Y
Audi A3 (2020-2026 / 8Y, MK 4) If the infotainment system of your new Audi A3 8y has serious software malfunctions, you must necessarily perform a factory data reset. Below we will…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2020-2027 - What problems with the Audi A3 instrument cluster? Read answer

How to Replace the Reverse Light Switch on a Suzuki Jimny

If the reverse light in the rear lamps does not illuminate when engaging reverse and the bulbs are functioning, the switch, also known as the bulb due to its shape, may be damaged. This switch is located on the gearbox; there is enough space to manoeuvre in the engine bay. Start by disconnecting the connector found on the left side of the engine bay when viewed from the front, near the cabin radiator hoses. Then, move symmetrically to the other side of the gearbox where the bulb is located. Take care with the O-ring seal during installation.

Watch the video!


by ScegliAuto

More videos