Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs on Audi A4 B8 2.0 TDI

Model: Audi A4 B8 - Years 2007-2016
Part: Glow plugs

Let's look at the procedure for removing and replacing the glow plugs on the Audi A4 B8, with a 2.0 TDI and 3.0 TDI engine. First, open the hood of your car and start by removing the caps from the glow plugs; then disconnect the electrical connectors and use a socket wrench with an extension to unscrew and remove the glow plugs, as shown in the video. At this point, replace them with new ones that have the same thread pitch, hand-tightening them before securing with a wrench, following the video until the end!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on the Audi A4 2.0 TDI
How to Replace the Glow Plugs on the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) This guide will show you how to remove and replace the glow plugs on the Audi A4 2.0 TDI, while also performing maintenance service. Specifically, we…
How do you replace the glow plugs in the Audi A4 B7 2.0 TDI?
How do you replace the glow plugs in the Audi A4 B7 2.0 TDI?
Audi A4 (2004-2008 / B7) The glow plugs are used to bring the engine to temperature and create the optimal conditions for starting the aforementioned engine. Here is a compre…
Replacing the Starter Motor on the Audi A4 1.9 TDI - 2.0 TDI
Replacing the Starter Motor on the Audi A4 1.9 TDI - 2.0 TDI
Audi A4 (2004-2008 / B7) In this guide, you will discover the steps to remove and replace the starter motor on the Audi A4, both with 1.9 and 2.0 TDI engines. First, lift the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos