Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A4-S4 heating radiator disassembly instructions

Model: Audi A4 B6 - Years 2000-2004
Part: Heater core

In today's video tutorial we will see the main instructions that will allow us to disassemble the internal radiator of the passenger compartment heating of an Audi A4-S4. First we open the bonnet of the car and we go to remove the upper gasket and the plastic bulkhead, which we find immediately under the wipers: then we disconnect the battery terminals and remove the latter. At this point we go inside the car and remove the lower bulkhead on the driver's side, unscrewing the fixing screws; then remove the central tunnel and disassemble the heating controls: follow the video to the end for complete disassembly!

Posted on 20 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the heating radiator on Audi A4 B6
How to replace the heating radiator on Audi A4 B6
Audi A4 (2000-2004 / B6) .. of the passenger compartment heating of the Audi A4 B6. First of all we open the bonnet and start by detaching the two pipes that we find on the.. …
How to remove the heating radiator of an Audi A4
How to remove the heating radiator of an Audi A4
Audi A4 (2004-2008 / B7) .. see how to remove the heating radiator of an Audi A4. We remove the plastic of the lining of the central tunnel (with special plastic or metal levers)... …
How do you replace the Audi A4 heating radiator?
How do you replace the Audi A4 heating radiator?
Audi A4 (1994-2000 / B5) .. In order to replace the Audi A4 heating radiator, the entire dashboard must be removed from both the passenger and the driver's.. …

Other guides you may be interested in

How to Remove the Door Panel on Nissan Micra

How do you remove the door panel (right side) on a Nissan Micra? Use a lever or screwdriver to pry at the handle on the door panel, detach it, and disconnect the terminals of the window switch (manual crank). Use a fixed screwdriver to unscrew the screws on the panel, then use a plastic lever to unclip all the clips around the perimeter of the door. Finally, pull away the panel with your hands, disconnecting the opening lever cable, the window lifter terminals, and the speakers. Reassemble everything by reversing the steps.

Watch the video!


by ScegliAuto

More videos