Do it yourself
Frequently asked questions about cars and motorcycles

Camshaft Adjustment and Oil Pan Cleaning

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Engine

See other generations:
Video tutorial

This video shows how to adjust the camshafts and clean the oil pan. First, remove the oil pan. Once removed, clean out all oil residues or dirt inside; before reassembling, apply sealant to the surface. To adjust the camshafts, you will need to remove the valve cover; remember how each piece is installed, and loosen the timing chain tensioner to remove the camshaft and its fastening components.

To reassemble everything, follow the steps in reverse and adjust the chain properly; install new gaskets and reassemble everything.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Audi A4 (2000-2004 / B6) This guide provides the main instructions for adjusting the doors on the Audi A4. First, open the front door of your car and start removing the Torx …
Audi A4 (2000-2004 / B6) Lift the vehicle on a hydraulic lift and unscrew the drain plug under the oil pan to drain the used oil. It is preferable to drain the oil before rep…
Audi A4 (2000-2004 / B6) Position the vehicle on appropriate car ramps to facilitate access under the hood: Place a drain pan directly under the oil pan drain plug to catch t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos