Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Yellow "Service" Light on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

Before you begin, sit in the driver's seat of your Audi A4. Start by pressing and holding the wrench-shaped button located below the right side of the instrument cluster. While holding the button, activate the instrument cluster by simply turning the key in the ignition switch. Once done, release the wrench-shaped button and press the "0.0" button. At this point, turn off the instrument cluster, and you will have completed the reset of the yellow "Service" light on your Audi A4.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Meaning of the Yellow Engine Light in Audi A4
Meaning of the Yellow Engine Light in Audi A4
Audi A4 (2000-2004 / B6) Today, you will discover the meaning of the yellow engine light that turns on in the dashboard (we are in an Audi A4): this indicates that there is s…
How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How to Reset the Service Light on an Audi A4?
How to Reset the Service Light on an Audi A4?
Audi A4 (2007-2016 / B8) To reset the Service light on an Audi A4, turn on the ignition to access the menu on the central display of the dashboard. Use the controls on the ce…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos