Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the glove compartment on the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Glove compartment

In order to replace the glovebox of the Audi A3, the panel on the side of the dashboard must be removed, which can be reached by opening the passenger door. Once the panel has been removed, it will be possible to unscrew the screws located immediately below and above the drawer, on its outside. Then it will be possible to unscrew the side screws from the part previously covered by the panel and those inside the drawer. In this way it will be possible to completely extract the control unit inside and completely remove the drawer.

Posted on 27 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glove Compartment of an Audi A3
How to Remove the Glove Compartment of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Learn how to remove the glove compartment located in the cabin of an Audi A3. Open the glove compartment and pull the side plastic cover using a leve…
How to disassemble the storage compartment drawer of the Audi A3
How to disassemble the storage compartment drawer of the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Below we will see the main instructions that will allow us to disassemble and replace the glove box of the Audi A3, in simple steps. First of all, we…
How to Remove the Glove Compartment Drawer on an Audi A3
How to Remove the Glove Compartment Drawer on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) How to remove the glove compartment drawer on an Audi A3? Here’s how to proceed: use a plastic lever to pop out the rivets on the cover located at th…

Other guides you may be interested in

How to Disassemble and Remove the Rear Camera of a Mercedes CLA

In this video, see how to disassemble and remove the camera (where the license plate light is located) from the rear hatch of a Mercedes CLA. First, open the rear hatch of the car, then remove the rear license plate. Use a screwdriver to remove the screws on the plastic trim of the hatch. Disconnect the plastic trim of the license plate light from the hatch, and use a screwdriver to remove the retaining clips (located between the hatch metal and the plastic trim). Finally, remove the rear camera located in the hatch (disconnect the power connector of the camera) of the car. For reassembly, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos