Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Alternator from the Audi A4 TDI

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Alternator

See other generations:
Video tutorial

Discover the main instructions in this guide that will allow you to remove and replace the alternator of the Audi A4 TDI. First, open the hood of your car and start by removing the plastic engine cover. Next, loosen the tensioner to remove the alternator belt, as shown in the video.

At this point, remove the mounting bolts of the alternator, disconnecting its electrical wiring. Remove the alternator and replace it with the new one, using the original replacement part, following the video until the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on an Audi A4 2.0 TDI
How to Replace the Alternator on an Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) Today, you will see step-by-step instructions for removing and replacing the alternator on an Audi A4 2.0 TDI. First, open the hood of the vehicle an…
Dismantling of the alternator of the Audi A4 3.0 TDI
Dismantling of the alternator of the Audi A4 3.0 TDI
Audi A4 (2007-2016 / B8) The main instructions in this guide will show us how to disassemble and replace the alternator of the Audi A4 3.0 TDI. First, lift the vehicle and st…
How to Rebuild the Alternator of the Audi A4 2.7L
How to Rebuild the Alternator of the Audi A4 2.7L
Audi A4 (1994-2000 / B5) In this brief and simple guide, learn how to rebuild and restore the stock alternator of the Audi A4 2.7L. First, remove the alternator and place it …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos