Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the timing belt on an Audi A3 by following a few simple steps that will guide you towards proper vehicle maintenance. The first thing you need to do is lift the bonnet and secure it with the appropriate prop; the next step is to raise the car with a hydraulic jack and secure it with appropriate axle stands.

Pull the tensioner pulley sideways using a 16 mm spanner; at this point, you need to remove the V-belt. Return the tensioner pulley to its initial position.

Check the condition and replace any worn parts if necessary; now you can install the new belt.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on an Audi A3?
How to Replace the Timing Belt on an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) Good morning, today's objective is to replace the timing belt on your Audi A3. Start by opening the front bonnet and removing the air filter system. …
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
Audi A3 (2012-2019 / 8V, MK 3) Below are the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (and other models with the same engine); the manufacture…
Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show you how to remove and replace the timing belt and water pump on the Audi A3 1.6 TDI, as well as the Volkswagen Go…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos