Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the gear knob on the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Shift knob

Let's find out the steps that will allow us to disassemble and replace the gear knob on the Audi A4 B8, following the instructions below. First of all we get on board the car and start removing the old automatic gear knob; to do this, we lever the sides of the cap, in order to release it, and then press on the base of the knob to remove it and extract it upwards, as shown in the video. At this point we are going to separate the headset from the gear knob, or we are going to replace everything directly; we just have to reassemble everything!

Posted on 6 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Shift Knob on Audi A4
How to Remove the Shift Knob on Audi A4
Audi A4 (2007-2016 / B8) To remove the shift knob, proceed as follows: start by disconnecting the climate control buttons from the center console by reaching underneath (just…
Replacement of the fuel pump on Audi A4
Replacement of the fuel pump on Audi A4
Audi A4 (2000-2004 / B6) How to replace the fuel pump on an Audi A4? Let's see the disassembly of the pump for replacement. We disconnect the battery cables for safety, then,…
Replacement of the exterior mirror of the Audi A4 B7
Replacement of the exterior mirror of the Audi A4 B7
Audi A4 (2004-2008 / B7) In this video we will see the procedure necessary for the disassembly and replacement of the exterior rear-view mirror of the Audi A4 B7. First we op…

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos