Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on the Audi A6 Allroad?

Model: Audi A6 MK 2, C5 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Clock

See other generations:
Video tutorial

To set the clock on the Audi A6 Allroad, turn on the instrument cluster. Turn the key to the ON position, making sure not to start the engine.

Now locate the small knob on the instrument cluster next to the display where the time is shown, and pull it towards you until the clock starts flashing. At this point, rotate the knob to adjust the clock and set the correct time as well as the date.

For each setting (hours, minutes, day, etc.), pull the knob towards you to confirm and proceed to the next setting.


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Audi A6 (2004-2012 / C6, MK 3) Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the i…
Audi A6 (2004-2012 / C6, MK 3) In this tutorial, you will see how to set the time in an Audi A6. This is a very simple and quick operation to perform after the battery has died or …
Audi A6 (2004-2012 / C6, MK 3) To set the clock on the Audi A6, first press the CAR button located on the center console, then press the SETUP button, which is directly below the p…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos