Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Oil

Model: Audi A5 8T3, 8F, 8T8, 8T - Years 2007-2016
Part: Engine oil

Changing the oil is very important to avoid problems with your car, so you should constantly check the oil level. To change it, lift the car with a jack and also unscrew the oil sump plug to allow the used oil to drain out. This operation should be performed with the engine partially warm to allow for better oil flow. After tightening both plugs and bringing the vehicle back to level, you can proceed with adding the new oil, checking the level and ensuring not to overfill.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the motor oil and oil filter of the Audi A5 3.0 TDI V6.
Replacement of the motor oil and oil filter of the Audi A5 3.0 TDI V6.
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) These short and simple instructions will show us how to replace the motor oil and oil filter of the Audi A5 3.0 TDI V6. First, lift the car and start…
How to check the engine oil level of the Audi A5
How to check the engine oil level of the Audi A5
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) We will see below the instructions which will allow us to check the engine oil level of the Audi A5, but also of the Q5. First of all, we get on boar…
How to check the engine oil level in the Audi A5?
How to check the engine oil level in the Audi A5?
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) In this tutorial we can see how to check the oil level in the Audi A5, a very simple and quick operation. In this model, there is no classic dipstick…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos