Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Fuel pump

In this tutorial we can see how to replace the fuel pump in the Audi A4 B6, very simple operation. First of all, let's make sure that the key is not inserted, then open the tailgate and remove both the bottom surface and the side panels. Once this is done, we identify the large circular cap placed on the right side, open it by unscrewing the relative screws and proceed with the disassembly of the pump. To do this, simply disconnect the power connector, the two fuel hoses and unscrew the external ring nut. Once extracted, we assemble the spare following the reverse procedure.

Posted on 5 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump on Audi A4
Replacement of the fuel pump on Audi A4
Audi A4 (2000-2004 / B6) How to replace the fuel pump on an Audi A4? Let's see the disassembly of the pump for replacement. We disconnect the battery cables for safety, then,…
How to Remove the Fuel Pump from an Audi A4
How to Remove the Fuel Pump from an Audi A4
Audi A4 (2000-2004 / B6) How to remove the fuel pump from an Audi A4? First, disconnect the battery cables; remove the carpet panel in the trunk. Use a socket wrench to remov…
How to disassemble the fuel pump from the Audi A4 tank
How to disassemble the fuel pump from the Audi A4 tank
Audi A4 (2000-2004 / B6) Is the fuel pump on Audi A4 damaged? Let's see how it disassembles. We disassemble the rear seats to access the fuel pump. Unscrew the tightening scr…

Other guides you may be interested in

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos