Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to replace the low beam bulbs in the Audi A3?

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Headlight bulb
Operation: How to replace the low beam bulbs in the Audi A3?

In this video we can see how to replace the low beam bulbs of the Audi A3. To do this, the bumper must first be removed, otherwise it will be impossible to access the rear area of the headlight. To do this, we unscrew all the fixing screws starting from those of the wheel arches, then we pass to those of the bottom and finally to the upper ones. Once removed, unscrew the bolts that hold the headlight anchored, disconnect the connector and open the rear cap. To remove the bulb, simply rotate it 90 degrees counterclockwise. Finally, we assemble the spare part and reassemble everything following the reverse procedure.


Posted on 16 July 2022 by ScegliAuto

    Frequently Asked Questions

    • A3 2003-2013 - How to replace the headlight bulbs in the Audi A3? Read Answer
    • A3 2012-2019 - How to replace the headlight bulb on an Audi A3? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos