Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light in Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part:

In this video we can see how to reset the tire warning light in the Audi A4, an operation to be carried out only after restoring the correct pressure in all the tyres. First, we turn on the instrument cluster, and then we enter the settings menu by pressing the lower button on the wipers control lever. In the menu, we go up to the "SET" item and get into the "Tyre pressure" section. At this point, select the "STORE" item and wait for the reset to complete. Finally, let's go back to the main screen and, to check that everything went well, turn the ignition off and on again.

Posted on 20 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Audi A4?
How to reset the tire pressure light in the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, we can see how to reset the tire pressure light in the Audi A4, an extremely simple and quick operation, to be done only once the c…
How to reset the tire pressure light in the Audi A4?
How to reset the tire pressure light in the Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial we can see how to reset the tire pressure light in the Audi A4, an extremely simple and quick operation, to be done only once the co…
How to reset the tire pressure sensor on the Audi A4 2015
How to reset the tire pressure sensor on the Audi A4 2015
Audi A4 (2007-2016 / B8) If on your 2015 Audi A4 there is no puncture or loss of tire pressure, but the warning light continues to stay on constantly on the instrument panel,…

How to Remove the Third Brake Light from a Renault Clio

In this video, we will see how to remove the third brake light from a Renault Clio. First, open the boot lid and remove the plastic rivets with a screwdriver, then close the boot. Extract the third brake light from the metal of the boot lid using your hands. Once the piece is removed from its housing, disconnect the power connector and attach the new third brake light. After fitting the bulbs, insert the piece back into the boot lid and secure it with the plastic rivets. Finally, check the correct operation of the lights after turning on the instrument panel.

Watch the video!


by ScegliAuto

More videos