Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Tunnel Plastics of the Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Center console tunnel

In this video tutorial, you will learn how to remove the center tunnel plastics of the Audi A4 B9, following the instructions below. First, get in the vehicle and start by removing the plastic from the center tunnel, disconnecting the various electrical cables underneath. Then, remove the center tunnel controls in the same way by disconnecting the electrical connectors for the buttons and the gear lever, as shown in the video. At this point, you can proceed with reassembling the center tunnel by applying the reverse procedure!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the console and central tunnel of the Audi A4
How to disassemble the console and central tunnel of the Audi A4
Audi A4 (2007-2016 / B8) In this guide, we will see the instructions that will allow us to disassemble and remove the console and the central tunnel of the Audi A4. First of …
Replacing the Shift Knob on an Audi A4
Replacing the Shift Knob on an Audi A4
Audi A4 (2007-2016 / B8) Let's look at removing the shift knob from an Audi A4. Enter the cabin of the A4 and locate the boot covering the shift lever. Detach the boot's trim…
Removing the Shift Knob on an Audi Q5
Removing the Shift Knob on an Audi Q5
Audi A4 (2004-2008 / B7) How to replace the shift knob on your Audi A4. In this video, we will see how to do it. Use a plastic lever to detach the trim of the leather boot. G…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos