Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Service warning light

Resetting the service light in the Audi A3 is a simple and quick operation. First, ensure all scheduled maintenance work has been completed. Start by inserting the key and turning on the ignition. Then, press and hold the long button on the right side of the dashboard next to the speedometer. At this point, you will see the service screen on the display. Keep the button pressed until the service interval is fully reset. Finally, restart the vehicle.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Audi A3?
How to reset the service in the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we will see how to reset the service indicator in the Audi A3, an extremely simple and quick operation that should be done only aft…
How to Reset the Service Light in an Audi A3?
How to Reset the Service Light in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we will see how to reset the service light in an Audi A3, an extremely simple and quick operation to perform only after completing …
How to Reset the Service Light in an Audi A3?
How to Reset the Service Light in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, you will see how to reset the service light in an Audi A3, a very simple and quick operation to perform only after completing all s…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos