Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in an Audi Q3?

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Replacing the battery in an Audi Q3 is a simple and quick task. Let's see how to proceed in this tutorial.

First, ensure the key is not in the ignition for safety. Start by opening the hood.

Next, remove all screws along the perimeter of the plastic cover and take it off. Disconnect the negative terminal by loosening the corresponding nut, then repeat the process for the positive terminal and remove the mounting bolt located in the lower left area.

At this point, you can take the battery out of the housing, insert the replacement, and reassemble everything.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Change the Battery in the Key Fob of an Audi Q3
How to Change the Battery in the Key Fob of an Audi Q3
Audi Q3 (2018-2025 / F3) In today's video, we will see how to replace the battery in the key fob for the second generation Audi Q3. This video applies to many other contempor…
How to replace the battery of the Audi Q3 key.
How to replace the battery of the Audi Q3 key.
Audi Q3 (2011-2018 / 8U) If the key for your first-generation Audi Q3 no longer works due to a completely dead battery, you will need to replace it with a new one. In the fol…
How to Replace the Remote Battery for the Audi Q3?
How to Replace the Remote Battery for the Audi Q3?
Audi Q3 (2018-2025 / F3) Replacing the dead battery in the Audi Q3 remote is very simple. Follow this tutorial that shows the procedure for various remotes; the one for the Q…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos