Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Audi A4 TDI air conditioning compressor hose replacement

Model: Audi A4 B8 - Years 2007-2016
Part: Air conditioning

In today's video tutorial we will see how to disassemble and replace the air conditioning compressor hose on the Audi A4 TDI. First of all we open the bonnet and start removing the upper plastic protection of the engine; then we go to disconnect the metal tube that we find connected to the valve, as shown in the video. At this point let's drain any fluid that we find inside it and replace it with the new one; then let's install the new gasket (o-ring), of the right thickness, applying the reverse procedure for reassembly!

Posted on 2 January 2023 by ScegliAuto

Video tutorial

Related tutorials

Replace the air conditioning compressor on the Audi A4 B7 2.0 TDI
Replace the air conditioning compressor on the Audi A4 B7 2.0 TDI
Audi A4 (2004-2008 / B7) In today's video we will see instructions on how to disassemble and replace the air conditioning compressor on an Audi A4 B7 2.0 TDI. First of all we…
Replacement air conditioning compressor on Audi A4 2004
Replacement air conditioning compressor on Audi A4 2004
Audi A4 (2004-2008 / B7) Let's see the replacement of the air conditioning compressor of an Audi A4. We lift the front hood of the engine, locate the starter motor. We discon…
Replacement of the crankshaft oil seal of the Audi A4 2.0 TDI.
Replacement of the crankshaft oil seal of the Audi A4 2.0 TDI.
Audi A4 (2007-2016 / B8) In this guide, we will see the necessary procedure for disassembling and replacing the crankshaft oil seal of the Audi A4 2.0 TDI. In order to access…

Other guides you may be interested in

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos