Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disable the mirror folding function on the Audi Q3.

Model: Audi Q3 8U - Years 2011-2018
Part: Side mirror

In this video, we see how to disable the folding of the external rearview mirrors. This function can be particularly useful in winter, when the outside temperature is low and ice can cause the mirror motor to burn out in the (useless) effort to open them. It is better to leave them open to avoid this situation. On the display, we do not see how to disable this function. So how do we do it? There is a method: we need to turn on the instrument panel, rotate the knob on the driver's side handle to the six position. If you do this with the panel off, you will see that the mirrors do not fold out, even if you lock the car with the remote. So this is your winter configuration. To return to the original configuration, turn on the panel and put the wheel back on six.

Posted on 13 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disable the Start&Stop of the Audi Q3
How to disable the Start&Stop of the Audi Q3
Audi Q3 (2011-2018 / 8U) Today we will explain how to deactivate the start&stop system of the Audi Q3 model 8U. We connect the OBD socket to the diagnostic computer via Bluet…
Where is the engine fuse box located in the Audi Q3?
Where is the engine fuse box located in the Audi Q3?
Audi Q3 (2018-2025 / F3) If you are looking for the engine fuse box of your Audi Q3, then in the following guide you will find all the instructions you need to locate it easi…
How do you deactivate the anti-theft alarm of the Audi Q3?
How do you deactivate the anti-theft alarm of the Audi Q3?
Audi Q3 (2018-2025 / F3) In order to deactivate the anti-theft alarm of the Audi Q3, there is no procedure that can be carried out through the controls on the car's onboard c…

Other guides you may be interested in

How to Replace the Lambda Sensor on an Opel Corsa

First, release the bonnet using the lever and lift it to access the front of the engine between the bumper and the engine, where the exhaust gas collectors are located. The lambda sensor is positioned here. To remove it, use a socket wrench to unscrew the sensor head and extract it to check its condition. If necessary, replace it with a new part. To reinstall, connect the new sensor to the connector and screw it into the correct position.

Watch the video!


by ScegliAuto

More videos