Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door handle in the Audi Q5?

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Handle

In this tutorial, we can see how to disassemble the rear door handle in the Audi Q5, a very simple and quick operation. First of all, we open the door in which we will be working, then we locate the small plastic cap indicated, located on the inner edge of the door itself, and remove it using a flat-tipped screwdriver. Next, we unscrew the bolt accessible from the hole with a Torx key, extract the lock cylinder, and separate the handle from the door. To install the replacement, simply follow the reverse procedure.

Posted on 19 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacing the rear door lock on the Audi Q5 MK1
Replacing the rear door lock on the Audi Q5 MK1
Audi Q5 (2008-2017 / MK 1, 8R) In this video tutorial we will see how to remove and replace the rear door lock actuator on the Audi Q5 first series, following the instructions belo…
How to replace the exterior rear door handle on an Audi Q5
How to replace the exterior rear door handle on an Audi Q5
Audi Q5 (2017-2025 / 80A, MK 2) Before starting, we will have to open the rear door of our Audi Q5. So let's start by disengaging and removing the handle cover. After that, we will …
How to disassemble the front door panel of the Audi Q5
Audi Q5 (2017-2025 / 80A, MK 2) Today we will discover the instructions that will allow us to disassemble the front door panel of the Audi Q5, in simple and quick steps. First of al…

Other guides you may be interested in

How to Remove the Left External Wing Mirror of a Volkswagen Polo

Let's see how to remove the left external wing mirror of a Volkswagen Polo (driver's side): remove the door panel (if necessary); use a lever to remove the internal trim of the mirror (there are plastic clips) and undo the securing bolts with a socket wrench. Once the securing bolts are removed: take out the mirror along with the adjustment electrical cables (manual wires) from the car door. To reassemble: refit the mirror with the bolts, the adjustment cables, and the plastic trim into the door panel. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos