Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight glass of the Audi A5?

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Headlight

In order to replace the front headlight glass of the Audi A5, first you need to loosen the screws that secure the optical unit to its housing, so that it can be removed from its housing by disconnecting the appropriate connectors. Once the optical unit is detached, it will be possible to heat the area of the headlight that connects the glass to the remaining part; in this way, the glue that holds the glass will be removed and it will be possible to detach the glass covering from the remaining part of the optical unit. Therefore, it will be possible to attach the new covering using the necessary amount of glue.

Posted on 20 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Audi A5 removing the headlight
Audi A5 removing the headlight
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Does the headlight need to be changed because it is damaged? Let's see the disassembly of the front headlight of an Audi A5. We raise the front hood …
How to Remove the Front Headlamp on an Audi A5
How to Remove the Front Headlamp on an Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Let's see how to remove and replace the front headlamp on an Audi A5: open the bonnet by pulling the lever located at the bottom right of the dashboa…
Replacement of the front headlight bulb of the Audi A5
Replacement of the front headlight bulb of the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) The following steps will show us how to disassemble and replace the headlight bulb of the Audi A5. First, open the hood of the car and start removing…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos