Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the interior ceiling of the Audi Q7

Model: Audi Q7 4L, MK 1 - Years 2006-2015

Below we will see the steps that will allow us to disassemble and replace the sky or the interior lining of the Audi Q7 roof. First, we get on board the car and start by removing and removing the interior light fixture, disconnecting the electrical connector of the bulbs; then we remove the roof grab handles and sun visors, unscrewing the fixing screws, as shown in the video. At this point, we remove the side plastic pillars, subsequently releasing the lining on the sides until it is completely removed, following the video tutorial until the end!

Posted on 8 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the ceiling light of an Audi Q5
How to remove the ceiling light of an Audi Q5
Audi Q7 (2006-2015 / 4L, MK 1) Let's see in this video how to remove the ceiling light of an Audi Q7. With a screwdriver or plastic lever we go to pry between the cover of the ceil…
How to replace the ceiling light bulbs in the Audi Q7?
How to replace the ceiling light bulbs in the Audi Q7?
Audi Q7 (2015-2024 / 4M, MK 2) Replacing the ceiling light bulbs in the Audi Q7, as we can see in this tutorial, is an extremely simple and quick operation. First of all, let's go …
How do I replace the passenger compartment fan on the Audi Q7?
How do I replace the passenger compartment fan on the Audi Q7?
Audi Q7 (2006-2015 / 4L, MK 1) To be able to replace the passenger compartment fan of the Audi Q7, you need to open the glovebox located on the passenger side and loosen the screws…

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos