Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the trunk closure cover of the Audi A4.

Model: Audi A4 B7 - Years 2004-2008

Today we will see the instructions for disassembling and replacing the plastic cover of the trunk closure of the Audi A4. First, open the rear door of the car and start gently prying on the sides of the cover to detach and remove it. Then, disconnect the electrical connector of the bulb light in the luggage compartment, as shown in the video. At this point, if necessary, replace the luggage compartment component or its bulb, securing it correctly by fitting it onto the pillar, applying the reverse process of disassembly!

Posted on 18 December 2023 by ScegliAuto

Video tutorial

Related tutorials

To be checked before replacing the trunk button of the Audi A4 B8.
To be checked before replacing the trunk button of the Audi A4 B8.
Audi A4 (2007-2016 / B8) If the trunk of our Audi A4 B8 is not working anymore and we think that the trunk button is broken, before changing the button, let's try this little…
How to remove the rear trunk cover on an Audi A4 vehicle
How to remove the rear trunk cover on an Audi A4 vehicle
Audi A4 (2007-2016 / B8) In case it is necessary to remove the rear bumper of an Audi A4 B8 model vehicle, first you need to remove the rear interior part of the trunk. Its r…
How to manually open the trunk of the Audi A4.
How to manually open the trunk of the Audi A4.
Audi A4 (2007-2016 / B8) The main steps today will show us how to manually open and in case of emergency, the rear trunk door of the Audi A4. First, we open the rear doors an…

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Replace the Reverse Light Switch on a Suzuki Jimny

If the reverse light in the rear lamps does not illuminate when engaging reverse and the bulbs are functioning, the switch, also known as the bulb due to its shape, may be damaged. This switch is located on the gearbox; there is enough space to manoeuvre in the engine bay. Start by disconnecting the connector found on the left side of the engine bay when viewed from the front, near the cabin radiator hoses. Then, move symmetrically to the other side of the gearbox where the bulb is located. Take care with the O-ring seal during installation.

Watch the video!


by ScegliAuto

More videos