Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Windshield Wipers

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Windshield wipers

Owning a car requires proper maintenance. This includes replacing the windshield wipers when they are worn out. Wipers must always be in perfect condition since their malfunction can compromise the driver's visibility and lead to unpleasant incidents, such as accidents due to poor visibility. Purchase new ones at any auto parts store. Then, lift the wiper arm positioned on the windshield. Flip the wiper over and notice a small lever that holds the arm to the rod; once found, push it and then release it downward. After that, use the same method to install the new blade.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the windshield wiper blades of the Audi A6?
How do you replace the windshield wiper blades of the Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To replace the windshield wiper blades of the Audi A6, you will need to lift them up so that they are not in contact with the windshield: once they a…
Replacing the Cabin Air Fan Motor
Replacing the Cabin Air Fan Motor
Audi A6 (2004-2012 / MK 3, C6) Open the hood, remove the plastic cover located just below the windshield by first pulling off the seal along the edge; remove the windshield wiper a…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Audi A6 (1994-1997 / MK 1, C4) The cabin air filter is located in the engine compartment, on the passenger side, just below the windshield. To replace it, open the hood, remove the…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos