Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the convertible top of the Audi A4 Cabrio?

Model: Audi A4 B7 - Years 2004-2008
Part: Convertible top

In order to remove the roof of the Audi A4 cabrio, you need to open the rear door of the car so that you can access the underlying roof. The latter can then be released from the screws that fix it to the motor and the mechanism that regulates its operation; in this way, the new roof can be inserted into its housing, properly fastened with the appropriate screws, and all the relevant connectors can be connected as well. This way, it will be possible to verify that the roof functions correctly even after replacing the entire roof.

Posted on 4 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How to repair soft top on Audi A4-S4 2005
How to repair soft top on Audi A4-S4 2005
Audi A4 (2004-2008 / B7) In this video tutorial we will see how to repair the soft top fabric (low-cut fabric) on an Audi A4 third series, in the S4 version. First of all, le…
In the Audi A4, how do you reset the convertible top?
In the Audi A4, how do you reset the convertible top?
Audi A4 (2004-2008 / B7) Is the roof of your Audi A4, specifically the B7 series, not working as it should and not completing its opening and closing cycle? Assuming it is no…
How do you close the convertible top of the Audi A4 when it is stuck?
How do you close the convertible top of the Audi A4 when it is stuck?
Audi A4 (2004-2008 / B7) In order to close the convertible top of the Audi A4 when it is stuck, you need to lower the panel located in the center of the rear seat backs, so t…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos