Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Trunk Lid on an Audi A7?

Model: Audi A7 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

On the Audi A7, the trunk lid can get stuck, for example, due to a problem with the control button or the lock actuator. In these cases, you can still perform an emergency opening by following the simple procedure shown in this tutorial.

First, unlock the locks using the remote, then open a rear door and, by operating the corresponding lever, lower the seatback. Next, go inside the trunk, remove the small indicated panel, and manually operate the lock.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box of an Audi A7?
Where to Find and How to Access the Fuse Box of an Audi A7?
Audi A7 (2018-2025 / MK 2) The fuse box of an Audi A7 is located in the trunk, specifically on the right side. To access it, open the trunk lid and locate the access panel situ…
How to Reset the Multimedia System in an Audi RS7?
How to Reset the Multimedia System in an Audi RS7?
Audi A7 (2010-2017 / MK 1) In an Audi RS7, the MMI multimedia system may freeze or show various signs of malfunction. In these cases, you can try to resolve the issue by resett…
Fuse Box for an Audi A7
Fuse Box for an Audi A7
Audi A7 (2010-2017 / MK 1) The fuses in a first-generation Audi A7 are located inside three dedicated fuse boxes. As shown in this tutorial, two of these boxes can be found on …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos