Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to disassemble the headlight of the Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Headlight
Operation: How to disassemble the headlight of the Audi A3

Today we will explain how to remove the left front headlight of the Audi A3 model 8p. This operation is very simple and quick to perform independently. To remove the headlight, we must first open the front hood and then unscrew the screws of the central upper hood. Once the screws are unscrewed, we can unscrew the screws of the wheel arch to release the headlight laterally. Remove the screws above it and unhook it. During removal, be careful not to damage the connector that needs to be disconnected. Once the headlight is removed, you can remove the bulb inside.


Posted on 6 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos