Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Battery

Below are the step-by-step instructions on how to disassemble and replace the battery of the Audi A4, in simple steps. First, open the rear hatch of the trunk and start removing the floor panel to access the battery; then remove the upper plastic cover and disconnect both battery terminals (positive and negative), as shown in the video. At this point, use a socket wrench with an extension to unscrew the battery bracket screw, remove it, and replace it with the new one (having the same amperage), following the video tutorial to the end!

Posted on 8 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in an Audi A4?
How to Replace the Key Fob Battery in an Audi A4?
Audi A4 (2004-2008 / B7) To replace the key fob battery in an Audi A4, use a tool to pry open the back cover of the device. Underneath, you will find the battery, which can b…
How to Replace the Remote Battery for the Audi A4?
How to Replace the Remote Battery for the Audi A4?
Audi A4 (2007-2016 / B8) If the battery in the remote for the Audi A4 is dead, replacing it is very simple. Let's see how to do it in the attached video tutorial. To replace …
How to Replace the Key Fob Battery on an Audi A4?
How to Replace the Key Fob Battery on an Audi A4?
Audi A4 (2014-2024 / B9) To replace the key fob battery on an Audi A4, press the button on the top of the device to remove the key. Once the key is removed, you will find the…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos