Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset TPMS on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Tire pressure warning light

We can see thanks to this video today how to reset the TPMS light, that is the tire pressure light on an Audi A4, B7 model produced from 2004 to 2008. Let's start by turning on the car's ignition without starting it, then press the lower button on the right lever to open the menu on the information display. Once done, select the "SET" option and then the "tire pressure" option, finally press the lower button again on the "set pressure" option and wait for the confirmation notification to complete the job.

Posted on 31 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the Audi A4
How to Reset the TPMS Light on the Audi A4
Audi A4 (2007-2016 / B8) Resetting the TPMS light on the Audi A4 is a straightforward task that can be done in a few simple steps. First, turn on the vehicle's instrument clu…
Resetting the Tire Pressure Light on the Audi A4
Resetting the Tire Pressure Light on the Audi A4
Audi A4 (2014-2024 / B9) Today, you will learn how to reset the tire pressure light on the Audi A4. Before resetting the TPMS sensors, ensure all four tires are at the proper…
How to reset the tire pressure sensor on the Audi A4
How to reset the tire pressure sensor on the Audi A4
Audi A4 (2014-2024 / B9) Let's see the instructions that will show us how to reset the TPMS sensors of the Audi A4; before performing the reset of the pressure indicator, it …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos