Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the external rearview mirror of the Audi A5

Model: Audi A5 8W6 - Years 2018-2025
Part: Side mirror

Below we will see the steps that will allow us to disassemble and replace the external rearview mirror of the Audi A5, following the instructions provided. First of all, we open the front door and start disassembling and removing the door panel; to do this, we unscrew all the fixing screws, disconnecting the electrical connectors of the switch panel, as shown in the video. At this point, we unscrew the screws of the external rearview mirror, disconnecting the wiring to remove it from the outside; all that's left is to replace it with the new one, applying the reverse procedure!

Posted on 5 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Mirror Cap on an Audi A5
How to Remove the Mirror Cap on an Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Before starting, exit your Audi A5 and approach the external mirror. Begin by pushing the mirror to the right to create a gap on the left side. Then,…
Replacing the External Wing Mirror of the Audi A5
Replacing the External Wing Mirror of the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) This guide explains how to remove and replace the external wing mirror of the Audi A5 by following these simple and quick steps. First, open the fron…
How to Remove the Mirror Cap of the Audi A5
How to Remove the Mirror Cap of the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Removing the cap of the external rear-view mirror on this car model is not complicated, but care must be taken to avoid damaging the press-fit insert…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos