Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror of the Audi A5

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Side mirror

This guide explains how to remove and replace the external wing mirror of the Audi A5 by following these simple and quick steps. First, open the front door and start by removing the door panel, unscrewing all the screws and disconnecting the electrical connector of the switch panel; then disconnect the wiring for the wing mirror, as shown in the video. Now remove the plastic cover and unscrew the fixing screws of the wing mirror to pull it out from the outside; then replace it with the new one!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the external rearview mirror of the Audi A5
Disassembly of the external rearview mirror of the Audi A5
Audi A5 (2018-2025 / 8W6) Below we will see the steps that will allow us to disassemble and replace the external rearview mirror of the Audi A5, following the instructions pro…
How to Remove the Mirror Cap on an Audi A5
How to Remove the Mirror Cap on an Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Before starting, exit your Audi A5 and approach the external mirror. Begin by pushing the mirror to the right to create a gap on the left side. Then,…
How to disassemble the external rearview mirror of the Audi A5
How to disassemble the external rearview mirror of the Audi A5
Audi A5 (2018-2025 / 8W6) Let's discover the useful information for disassembling and replacing the external rearview mirror of the Audi A5. First, we open the front door of t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos