Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Exhaust Tip

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Exhaust muffler

The video shows how to replace the exhaust tip on your car with a "tuning" style tip.
After properly lifting the car on a lift, cut the original tip to remove the section of the catalytic converter. Then, weld the necessary extension to connect the new exhaust to the old one. Once the welding is finished and the previous cut is refined using a grinder and various tools, assemble the parts, ensuring that the new tip does not touch any plastic parts or body components.
The car in the video is an Audi TT.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service warning light on the Audi TT first series
How to reset the service warning light on the Audi TT first series
Audi Tt (1998-2006 / 8N, MK 1) For this guide, the procedure for resetting the service warning light for the first series Audi TT will be described. The steps to follow are, in ord…
Replacement of the alternator for the Audi TT 2.0 TFSI.
Replacement of the alternator for the Audi TT 2.0 TFSI.
Audi Tt (2006-2014 / 8J, MK 2) In this guide, we will see the main instructions useful for disassembling and replacing the alternator of the Audi TT 2.0 TFSI. First, we open the en…
How to replace the front headlight bulbs in the Audi TT?
How to replace the front headlight bulbs in the Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Audi TT, a very simple and quick operation. First of all, make sure that …

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos