|
Do it yourself
| |||
| ||||
How to replace the airbag of the Audi A1 (and also of the A6 and A7)
In this video we can see how to replace the airbag of the Audi A1, but the system is exactly the same also for the A6 and A7: first we disconnect the negative pole of the battery, to prevent the airbag from accidentally exploding while we handle it, then we pull the steering wheel towards us and then turn it all to the right, in order to highlight the small hole on the back of the steering wheel itself, which the youtuber shows us with the help of a mirror. We insert a small screwdriver into the hole, pushing it inside and at the same time upwards to detach the spring. We turn it all to the other side and repeat the operation with the hole on the left. We disconnect the electrical connector and at that point the airbag is removed from its housing. We remove the steering wheel controls and if necessary we also remove the steering wheel. To put everything back in place, we proceed in reverse.
Posted on 11 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Audi A1
(2018-2025 /
GB, MK 2)
In this video, we see how to deactivate the passenger airbag on an Audi A1. In the middle of the dashboard, above the hazard warning triangle, we see…
Audi A1
(2010-2018 /
MK 1, 8X)
During the operation of removing the airbag from a vehicle, it is necessary to first disconnect the battery, in order to prevent the system from acti…
Audi A1
(2010-2018 /
MK 1, 8X)
Let's talk about the airbag of the Audi A1, more specifically the one installed inside the steering wheel. If there is a specific technical need, it …
Other guides you may be interested in
|
How to Remove the Right Front Door Panel on an Opel Mokka
To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |