Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the headrests of the Audi Q5

Model: Audi Q5 8R, MK 1 - Years 2008-2017

Following the instructions in this guide, we will see how to disassemble and remove the front headrests, but it also applies to the rear headrests, of the Audi Q5. First, we get on board the vehicle and start pressing and holding the buttons found on the side of the headrest; now we lift the headrest upwards until it detaches and remove it, as shown in the video. At this point, it will be possible to repair or replace the headrest, reinserting it and then adjusting the height, applying the same procedure to the other headrests!

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headrests of the front seats on the Audi Q5
How to remove the headrests of the front seats on the Audi Q5
Audi Q5 (2008-2017 / 8R, MK 1) In today's video we will show you how to remove, in simple and quick steps, the headrests of the front seats on an Audi Q5 first series. First of all…
How to remove the rear headrests on the Audi Q5.
How to remove the rear headrests on the Audi Q5.
Audi Q5 (2017-2025 / 80A, MK 2) Although removing headrests is never recommended, let's see how to remove the rear headrests on the Audi Q5. In this case, it becomes necessary due t…
How to disassemble the car stereo of an Audi Q5
How to disassemble the car stereo of an Audi Q5
Audi Q5 (2008-2017 / 8R, MK 1) Start by sitting in the driver's seat of our Audi Q5. Then we will have to disengage and move the car radio frame, levering it with a thin but resist…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos