Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Washer Fluid Reservoir in the Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the washer fluid reservoir in the Audi A3, a very simple and quick operation. First, lift the front left side of the vehicle, then remove the wheel.

Go underneath the engine bay and also remove the protective panel. Next, unscrew the fastening screws from the inner front area of the wheel arch, remove the cover, and proceed by draining the reservoir, followed by its removal.

To fit the replacement, simply follow the reverse procedure.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) To replace the timing belt on the Audi A3 2.0 TDi, open the bonnet to access the components inside the engine bay. This will allow you to remove obst…
Audi A3 (2003-2013 / 8P, MK 2) In this video, you will learn how to replace the timing belt of the Audi A3. First, remove the water reservoir and the windscreen washer reservoir to…
Audi A3 (1996-2003 / MK 1, 8L) Today's guide shows the steps to remove and replace the front bumper of the Audi A3. First, open the bonnet and start unscrewing the plastic screws f…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos