Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Beta 50
Part:

To dismantle the fairing of your Beta 50, first remove the seat by unscrewing the appropriate screw located at the rear of the seat. Use a ratchet spanner to remove the left side rear fairing, which is secured with three screws. Use a ratchet spanner to remove the right side rear fairing, which is also secured with three screws. Unscrew the four screws located in the upper fairing and tank protection. If necessary, unscrew the tank securing screws to access the frame for maintenance.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Carburettor Adjustment for a Beta 50rr
Carburettor Adjustment for a Beta 50rr
Beta 50 Today, we will give you some tips for adjusting the carburettor of a Beta 50rr. First, check the colour of the spark plug to determine if your carbur…
How to Change the Gear Oil on a Beta 50 RR
How to Change the Gear Oil on a Beta 50 RR
Beta 50 This guide will show you how to change the transmission oil on a Beta 50 RR, following the instructions below. First, place the bike on a stand and w…
How to Start a Beta 50
How to Start a Beta 50
Beta 50 Start by sitting on the seat of your TM Racing 125. Next, open the fuel tap. Then, insert the key into the ignition switch and turn it fully clockwis…

How to Replace the Fork Seal on a Malaguti XSM 125?

To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one.

Watch the video!


by ScegliAuto

More videos