Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Beta
    3. : Beta 50

Beta Beta 50 - Video guides

Beta Beta 50
How to Change the Gear Oil on a Beta 50 RR
This guide will show you how to change the transmission oil on a Beta 50 RR, following the instructions below. First, place the bike on a stand and warm up the …Read all…
Posted on 18 July 2026 by ScegliAuto
Beta Beta 50
How to Start a Beta 50
Start by sitting on the seat of your TM Racing 125. Next, open the fuel tap. Then, insert the key into the ignition switch and turn it fully clockwise. After …Read all…
Posted on 3 July 2026 by ScegliAuto
Beta Beta 50
Carburettor Adjustment for a Beta 50rr
Today, we will give you some tips for adjusting the carburettor of a Beta 50rr. First, check the colour of the spark plug to determine if your carburettor …Read all…
Posted on 17 May 2026 by ScegliAuto
Beta Beta 50
How to Dismantle the Fairing of a Beta 50
To dismantle the fairing of your Beta 50, first remove the seat by unscrewing the appropriate screw located at the rear of the seat. Use a ratchet spanner to …Read all…
Posted on 30 March 2026 by ScegliAuto

See also:

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos