Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will show you how to change the transmission oil on a Beta 50 RR, following the instructions below. First, place the bike on a stand and warm up the engine for a few minutes; then, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, replace the small oil filter and then unscrew the filler cap, topping up the gear oil; finally, check the oil level using the dipstick!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Carburettor Adjustment for a Beta 50rr
Carburettor Adjustment for a Beta 50rr
Beta 50 Today, we will give you some tips for adjusting the carburettor of a Beta 50rr. First, check the colour of the spark plug to determine if your carbur…
How to Dismantle the Fairing of a Beta 50
How to Dismantle the Fairing of a Beta 50
Beta 50 To dismantle the fairing of your Beta 50, first remove the seat by unscrewing the appropriate screw located at the rear of the seat. Use a ratchet sp…
How to Start a Beta 50
How to Start a Beta 50
Beta 50 Start by sitting on the seat of your TM Racing 125. Next, open the fuel tap. Then, insert the key into the ignition switch and turn it fully clockwis…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos