Do it yourself
Frequently asked questions about cars and motorcycles

Carburettor Adjustment for a Beta 50rr

Model: Beta Beta 50
Part: Carburetor

Video tutorial

Today, we will give you some tips for adjusting the carburettor of a Beta 50rr. First, check the colour of the spark plug to determine if your carburettor setting is rich, lean, or correct. One way to adjust it is to act on the needle: remove the diaphragm spring, the diaphragm itself, and the conical needle.

Move the clip on the needle to adjust the carburettor, then reassemble the diaphragm and the conical needle. If that is not sufficient, adjust the screws on the carburettor, trying different settings until you find the desired adjustment.

Cheers!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Beta 50 This guide will show you how to change the transmission oil on a Beta 50 RR, following the instructions below. First, place the bike on a stand and w…
Beta 50 Start by sitting on the seat of your TM Racing 125. Next, open the fuel tap. Then, insert the key into the ignition switch and turn it fully clockwis…
Beta 50 To dismantle the fairing of your Beta 50, first remove the seat by unscrewing the appropriate screw located at the rear of the seat. Use a ratchet sp…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos