Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a BMW 3 Series?

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front door panel on a BMW 3 Series, a very simple and quick operation. First, open the door you will be working on, then carefully pry off the cover of the handle using a plastic trim tool to avoid leaving any marks.

Next, remove the screws that were exposed using a Torx screwdriver, take out the window switch console, and disconnect the corresponding connector. At this point, simply pry along the perimeter of the panel, separate it from the door, and install any replacement part if needed.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
How to Remove the Door Panel of a BMW 3 Series
How to Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, open the front door of your BMW 3 Series. Begin by prying and removing the center insert of the door panel using a thin but stu…
How to disassemble the front door airbag of the BMW 3 Series
How to disassemble the front door airbag of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) These short and simple steps will allow us to disassemble and replace the airbag of the front door of the BMW 3 Series. First, we open the front door…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos