Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Seat

Let's see how to remove the front seat of a BMW 3 Series. This video explains how to proceed. First, move the seat forward (using the electric buttons if available) and raise the seat cushion. Then, loosen the fastening bolts on the rear track using a socket wrench. Move the seat back with the adjustment buttons and remove the fastening pins from the front of the track. Finally, disconnect the power connectors for the front seat. Reinstall the front seat by reversing the disassembly steps mentioned earlier.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front seat of the BMW 3 Series
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's guide will show us how to disassemble and replace the front seat of the BMW 3 Series, following the instructions below. First, open the front…
How to disassemble the front seat of the BMW 3 Series
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the instructions that will allow us to disassemble and eventually replace the front seat of the BMW 3 Series. First, we op…
Removing BMW 3 Series Seat
Removing BMW 3 Series Seat
BMW Serie 3 (1998-2006 / E46) Is the seat of your BMW 3 Series due for replacement? Here’s how to remove the front seat. Move the seat back (press the electric buttons) and raise …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos