Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the BMW X2 Service indicator light

Model: BMW X2 F39 - Years 2017-2023
Part: Service warning light

After changing the engine oil of the BMW X2, we need to reset the system that alerts us to the need for the operation, with a reminder on the instrumentation. Sit in the driver's seat, press the start button, press and hold the button to the left, at the bottom, of the speedometer. After a few seconds, on the display below, we see the silhouette of the car with the request for reset; release the button and press again until we see a scrolling bar appear, release and at the end of the scrolling the reset operation will be completed.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the BMW X2?
How to reset the tire pressure light in the BMW X2?
BMW X2 (2017-2023 / F39) Resetting the tire pressure warning light in the BMW X2, as we can see in this tutorial, is an extremely simple and quick operation. Before proceedin…
How do you reset the brake wear indicator light on the BMW X2?
How do you reset the brake wear indicator light on the BMW X2?
BMW X2 (2017-2023 / F39) From the instrument panel of the BMW X2, you can reset the brake wear indicator by activating the instrument panel, inserting the appropriate key int…
How to reset the tire pressure warning light in the BMW X2?
How to reset the tire pressure warning light in the BMW X2?
BMW X2 (2017-2023 / F39) In this tutorial we can see how to reset the tire pressure warning light in the BMW X2, an extremely simple and quick operation, to be performed only…

Other guides you may be interested in

How to Change the Cabin Filter on an Opel Mokka

Learn how to change the cabin filter fitted in the Opel Mokka. Open the glove compartment and disconnect the plastic guides (located on the sides of the drawer if present), unscrew the pins around the perimeter of the drawer; rotate the glove compartment forward, pull off the cover cap, and remove the air filter from its housing as shown in the video. Once this is done, insert the new ventilation filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, refit the cover of the box along with all the components of the glove compartment as they were removed earlier.

Watch the video!


by ScegliAuto

More videos