Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Starter motor

To perform this task, first release the hood from the latch and then remove the bolts securing the upper part of the bumper as shown in the video. You will also need to remove the section of the hood located just below the windshield. Remove the remaining parts indicated in the video, including the engine cover. You will also need to remove the intake manifolds to access the starter motor of your vehicle. Disconnect the cables from the starter and then remove the bolts that secure it.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …
Where is the starter motor located in the BMW 3 Series?
Where is the starter motor located in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this video we can see where the starter motor is located in the BMW 3 Series and how to proceed in case we need to replace it. As shown, the start…
Disassembly of the starter motor of the BMW 3 Series 320D.
Disassembly of the starter motor of the BMW 3 Series 320D.
BMW Serie 3 (1998-2006 / E46) Today we will discover the main instructions that will allow us to disassemble and replace the starter motor of the BMW 3 Series 320D. First of all, …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos