Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the indicator light indicate when a car is lifted on a bridge in the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Warning light – error code

If the warning light depicting a car lifted on a bridge has lit up in the instrument panel of our BMW X1, it means that it is time to carry out the service as the relevant interval has been exceeded. Once the service is done at our trusted workshop, we can reset the warning light following the simple procedure shown in this tutorial. First of all, let's go inside the cabin, then turn on the instrument panel and hold down the left button on the dashboard. Then scroll through the various available services and, once you reach the one to reset, press the button again.

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on a BMW X1?
How to Reset the Tire Pressure Light on a BMW X1?
BMW X1 (2009-2015 / E84) In this tutorial, you will learn how to reset the tire pressure light on a BMW X1. This operation is very simple and should only be done after restor…
How to install and connect the dashcam on the BMW X1
How to install and connect the dashcam on the BMW X1
BMW X1 (2015-2022 / F48) This brief guide will show us the main instructions on how to install the dashcam or recording camera on the BMW X1. First of all, we get on board th…
How do you reset the tire pressure warning light on the BMW X1?
How do you reset the tire pressure warning light on the BMW X1?
BMW X1 (2015-2022 / F48) It will be possible to make the tire pressure warning light disappear completely from the instrument panel of the BMW X1 by navigating within the mai…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos