Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Placement for the BMW i4

Model: BMW i4 MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

Video tutorial

In this guide, you will see the diagram and placement of the fuse boxes for the BMW i4. First, open the front door on the passenger side and locate the internal fuse box, which is situated under the glove compartment. Next, find another fuse box above the driver's footwell, as shown in the video.

Now, locate the fuse box in the trunk by removing the side trim for access. The table shown in the video contains all the fuse codes and amperages, which are useful for any replacements.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Where can the electric BMW i4 be charged?
Where can the electric BMW i4 be charged?
BMW i4 (2021-2026 / MK 1) In the BMW i4 (as in most electric cars), the charging port is located exactly where the traditional fuel filler door is on a combustion engine vehic…
FastGuard Protection for BMW i4
FastGuard Protection for BMW i4
BMW i4 (2021-2026 / MK 1) In this video, we can see how to apply "FastGuard" protections, which are applied to the most exposed areas of the bodywork of high-end cars (like th…
How to change the battery of the BMW I4 key.
How to change the battery of the BMW I4 key.
BMW i4 (2021-2026 / MK 1) To replace the battery inside your BMW I4 key, you need to follow the procedure described in this new mini guide for you. First of all, make sure to …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos