Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a BMW X1 F48

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

In this article, we will see how to reset the oil change light on the BMW X1 F48. It is recommended to perform this procedure only after changing the oil. To execute the reset, first start the instrument cluster, then press the button located on the left side and hold it for 10 seconds until the oil light appears.

Once the light is on, release the button and press it for 3 seconds to open the reset menu.

When the reset option appears, release the button and press it again for 3 seconds. At this point, confirmation of the reset will be requested; release the button and press it again for 3 seconds to confirm the reset.

The light will now be reset, and you can restart the cluster to verify that the procedure was successful.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to reset the service light on the 2018 BMW X1
How to reset the service light on the 2018 BMW X1
BMW X1 (2015-2022 / F48) The service light activates on a vehicle when it is necessary to go to the workshop to perform the car service. The operation following the service i…
How to Reset the Service Light on the 2017 BMW X1 F48
How to Reset the Service Light on the 2017 BMW X1 F48
BMW X1 (2015-2022 / F48) In this guide, you will learn the steps required to manually reset the service light on the instrument cluster of your 2017 BMW X1 F48. First, enter …
How to Reset the Oil Light on the BMW X1
How to Reset the Oil Light on the BMW X1
BMW X1 (2015-2022 / F48) Reset the oil light on the BMW X1, model F48. It is very simple; just turn on the ignition and press the button on the instrument cluster for a few s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos