|
Do it yourself
| |||
| ||||
Replacement of Front Headlight Bulb Angel Eyes with LUX H8 Bulb
Model: BMW Serie 3
E92, E91, E90
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
This video is currently unavailable
Once the hood is opened and secured safely, locate the plastic cap above the headlight. Using a flathead screwdriver, press down on the locking tabs of the cap and remove it: at this point, you can see the bulb to be replaced. Rotate the bulb holder clockwise to detach it from the headlight reflector (bayonet mounting system). Disconnect the connector attached to the bulb holder by carefully spreading the side locking tabs. Then connect the new LUX H8 bulb's connector to the one coming from the ballast (the mating direction is fixed) ensuring the tabs snap into place. Finally, insert the new bulb into the designated slot of the headlight reflector, aligning the tabs correctly and rotating counterclockwise to secure it. Position the ballast inside the headlight housing and reattach the cap by inserting it from the back first and then securing the front tabs.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
To install the angel eyes bulbs on the BMW 3 Series, open the hood and remove the bolt located on the top of the headlight that contains the turn sig…
BMW Serie 3
(2005-2013 /
E92, E91, E90)
To replace the LED bulbs in the ANGEL EYES headlights, you must completely remove the wheel to access the front lighting assembly. Unscrew the screws…
BMW Serie 3
(1998-2006 /
E46)
To install the ANGEL EYES bulb kit in the headlights, you must completely remove the front light assembly. Obtain the kit and start with the plastic …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris
These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |