Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the front bezel on BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Mask
Operation: How to remove the front bezel on BMW 3 Series

Let's see in this video how to remove the grille placed on the front bumper on BMW 3 Series. Let's get ready to remove the plastic grille frame on the two parts of the bumper: with a special plastic lever we go to pry between the frame and the bumper until it releases the plastics placed on the inside (we unhook the bumper at the top to work better). Once the plastic has been released, remove the grille from the bumper and mount a new one. We reassemble the grille in the car's bumper by pressing on it until it locks into the bumper. We check the correct assembly of the parts.


Posted on 18 October 2023 by ScegliAuto



Replacing the front bezel
BMW Serie 3 (1998-2006 / E46) The disassembly operation is very simple and easy. The grille is held in place by four small lateral stops. Using the special tool, pry between the r
Assembly of the front bumper grille of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today we will see, in this video tutorial, how to remove and replace the front bumper grille of the BMW 3 Series, but also of the 5 Series, in simple
How to disassemble the front seat of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's guide will show us how to disassemble and replace the front seat of the BMW 3 Series, following the instructions below. First, open the front

Other guides that may interest you

How to reset the Renault Master AdBlue warning light

If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared.

Watch the video!


by ScegliAuto

More videos